Changelog

What changed in each version of the rescue switcher. The TOS Emulator and the Kickstart Multi ROM have changelogs of their own, for their firmware and their SWITCHER.

Table of contents
  1. 4.0.0 (2026-10-10) - Self-test release
    1. New Features
    2. Fixes
  2. 3.1.0 (2026-03-11) - First release

4.0.0 (2026-10-10) - Self-test release

For firmware v4.0.0 only: the rescue switcher 3.1.0 stops at its “not compatible” screen under firmware v4.0.0.

New Features

  • T runs a self-test of the board. It checks every address and data line, thousands of random reads, that the board answers commands (8, then 1,000), that its flash reads back the same every time, and the ROM list and settings stored in it. On an Atari it names the machine, the monitor line and the RAM; on an Amiga, the chipset and the RAM.
  • S on the self-test screen runs a 30-second soak test.
  • At start it checks that the board answers, and says so at once if it does not.
  • The start screen shows the version and the image size.

Fixes

  • On an Atari with a monochrome monitor the screen could come up shifted after a cold start.
  • Long messages and names no longer run into the next line.

3.1.0 (2026-03-11) - First release

The first rescue switcher, for the Atari ST, STE and Amiga 500 and 2000, with firmware 3.1.0.

Previous: Troubleshooting Main